SN74CB3T16211GQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 9.5Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CB3T16211 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 70μA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CB3T16211GQLR Overview
As a means of saving space, digital switch is provided in the 56-VFBGA.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 56 terminations are designed as a part of it.Its logic switch base part number is 74CB3T16211 which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.This turn signal switch consists of 56 component pins.BALL represents the end of conductors.Single is employed as its supply type.Currently, it is configured with a 56 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of CB3T/3VT.As a result, signal multiplexer provides a total of 24 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 70μA current of multiplexer ic.The resistance is 2.It operates with a resistance of 9.5Ohm.
SN74CB3T16211GQLR Features
Supplied in the 56-VFBGA package
Adopting a supply type of Single
SN74CB3T16211GQLR Applications
There are a lot of Texas Instruments SN74CB3T16211GQLR Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Injectors
- Robotic vehicles
- Encrypted communications system
- Home automation system
- Transmission from the computer system of a satellite
- Seven segment displays
- HDMI applications
- Automatic health monitoring systems
- Textile mills
