Parameters |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
70μA |
Output Current |
64mA |
Number of Bits |
24 |
Propagation Delay |
12 ns |
Quiescent Current |
70μA |
Turn On Delay Time |
12 ns |
Family |
CB3T/3VT |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
100MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.07mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1mm |
Length |
7mm |
Width |
4.5mm |
Thickness |
750μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-VFBGA |
Number of Pins |
56 |
Weight |
58.28662mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
9.5Ohm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CB3T16211 |
Pin Count |
56 |
Circuit |
12 x 1:1 |
SN74CB3T16211ZQLR Overview
In order to conserve board space, digital switch is included in the 56-VFBGA.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 56 terminations are designed as a part of it.There is a base part number 74CB3T16211 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 2.5V voltage.This turn signal switch has a total of 56 component pins.As the end of conductors, it uses BALL.Single is used as its supply type.The board has 56 pins configured.It is mounted in the way of Surface Mount.Among the family of CB3T/3VT the logic switch is a member.The multiplexer ic provides 24 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 70μA current of multiplexer ic.In accordance with TR, switches can be packaged.The resistance of the signal switching is 2.A resistance of 9.5Ohm is used to operate the signal switching.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CB3T16211ZQLR Features
Supplied in the 56-VFBGA package
Adopting a supply type of Single
SN74CB3T16211ZQLR Applications
There are a lot of Texas Instruments SN74CB3T16211ZQLR Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Time division multiplexing system
- Automatic health monitoring systems
- War field flying robot with a night vision flying camera
- Audio transmission
- D/A converters
- Data collection system
- Decimal decoder
- Paper plants
- Enabling different functions units in microprocessor instruction decoding