SN74CB3T16212DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus FET Exchange Switch |
| Resistance | 8.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CB3T16212 |
| Pin Count | 56 |
| Circuit | 12 x 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 4 |
| Nominal Supply Current | 70μA |
| Output Current | 64mA |
| Number of Bits | 2 |
| Throw Configuration | DPDT |
| Propagation Delay | 250 ps |
| Quiescent Current | 70μA |
| Turn On Delay Time | 15.5 ns |
| Family | CB3T/3VT |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T16212DGVR Overview
Due to the lack of space on the board, digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus FET Exchange Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Since they are members of the 74CB series, they can be used in a wide variety of applications.This configuration includes 56 terminations as part of its basic functionality.There is a base part number 74CB3T16212 that can be used to locate signal switch's related components as well.For multiplexer's system, 2.5V voltage is supplied.There are 56 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CB3T/3VT the logic switch is a member.As a result, signal multiplexer provides 2 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.Avoid unnecessary failures by keeping Vsup at 3.6V.The power supply of 2.5/3.3V is provided for mux switch's normal operation.Other Logic ICs is a category for the digital switch ics.In the absence of external influences, it consumes 70μA current of multiplexer ic.It has 24 inputs.The signal switching operates with a resistance of 4.It operates with a resistance of 8.5Ohm.For higher switches' flexibility, the output current is set to 64mA.
SN74CB3T16212DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T16212DGVR Applications
There are a lot of Texas Instruments SN74CB3T16212DGVR Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Metal detectors
- A/D converters
- Encrypted communications system
- Logic circuits
- Computer memory
- GLAN
- Recording transmission
- CPU memory location identification
- Automatic health monitoring systems
