SN74CB3T1G125DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3T1G125 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 250 ps |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Address Bus Width | 1b |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.02mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T1G125DCKR Overview
Due to the fact that it is provided in the 5-TSSOP, SC-70-5, SOT-353, digital switch allows the board to be compacted.Cut Tape (CT) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Several applications are possible for 74CB series multiplexers.Among its basic configurations are 5 terminations.The base part number is 74CB3T1G125, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 2.5V voltage.This turn signal switch contains 5 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.It is configured with 5 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of CB3T/3VT.The multiplexer ic provides 1 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.Avoid unnecessary failures by keeping Vsup at 3.6V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without external influences, it consumes 20μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.The resistance of the signal switching is 2.This signal switching operates at a resistance of 8Ohm.There are 1 elements used for the mux switch configuration.For greater switches' flexibility, the output current of 64mA is provided.
SN74CB3T1G125DCKR Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
SN74CB3T1G125DCKR Applications
There are a lot of Texas Instruments SN74CB3T1G125DCKR Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- War field flying robot with a night vision flying camera
- Metal detectors
- Automation system
- Memory chips
- Analog to digital conversion
- A robotic vehicle with the metal detector
- Automatic Monitoring systems
- HDMI applications
- GLAN
