SN74CB3T3125DGVR

14 Terminations2.3V~3.6V 14 Pin 74CB3T3125 Signal switch74CB Series 4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3T3125DGVR
Package: 14-TFSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 125
Description: 14 Terminations2.3V~3.6V 14 Pin 74CB3T3125 Signal switch74CB Series 4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TFSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	41.787197mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Bus Switch
Resistance	8Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Base Part Number	74CB3T3125
Pin Count	14
Number of Elements	4
Circuit	1 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	20μA
Output Current	64mA
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	20μA
Turn On Delay Time	9 ns
Family	CB3T/3VT
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	100MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	3.6mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3T3125DGVR Overview

In order to conserve board space, digital switch is included in the 14-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 14 terminations.The base part number is 74CB3T3125, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemIn this turn signal switch, there are 14 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.The board has 14 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of CB3T/3VT.Signal multiplexer consists of 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 20μA current of multiplexer ic.The switches packaging is based on TR.With a resistance of 0, it operates.A resistance of 8Ohm is used to operate the signal switching.In mux switch configuration, there are 4 elements.The output current of 64mA is provided for higher switches' flexibility.