SN74CB3T3125PWR

14 Terminations2.3V~3.6V 14 Pin 74CB3T3125 Signal switch74CB Series 4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3T3125PWR
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 887
Description: 14 Terminations2.3V~3.6V 14 Pin 74CB3T3125 Signal switch74CB Series 4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Bus Switch
Resistance	8Ohm
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Base Part Number	74CB3T3125
Pin Count	14
Output Voltage	5.5V
Number of Elements	4
Circuit	1 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Output Current	64A
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	20μA
Turn On Delay Time	9 ns
Family	CB3T/3VT
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	100MHz
Nominal Input Voltage	1.7V
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Drain to Source Resistance	8Ohm
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3T3125PWR Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 14-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CB series, which provide extensive application potential.There is a design for terminating 14 as part of its basic configuration.To find signal switch's related components, a base part number of 74CB3T3125 may also be used.The turn signal switch is supplied with a voltage of 2.5V volts.Signal switch has 14 component pins.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 14 pins configured.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CB3T/3VT.In this signal multiplexer, there are 1 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.Bus Driver/Transceiver is the classification for this the digital switch ic.It consumes 20μA current of multiplexer ic since it is not affected by external factors.The switches packaging is based on TR.The resistance of the signal switching is 2.This signal switching operates at a resistance of 8Ohm.In the mux switch configuration, there are 4 elements.It is possible to provide a current output of 64A for greater switches' flexibility.