SN74CB3T3125PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 9 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 9 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3T3125PWRG4 Overview
For the purpose of saving board space, digital switch is included in the TSSOP.Tape and Reel is the method used for packaging.The basic configuration includes 14 terminations.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch contains 14 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.The board has 14 pins configured.Surface Mount is the way it is mounted.Among the family of CB3T/3VT the logic switch is a member.The multiplexer ic provides 1 bits.The power supply of 2.5/3.3V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 20μA current of multiplexer ic.A resistance of 2 governs its operation.This signal switching operates at a resistance of 8Ohm.In this case, operating this signal switch at 85°C is acceptable.A temperature of the multiplexer of -40°C should be maintained for minimal operation.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.3V.In the mux switch configuration, there are 4 elements.As its logic IC, it uses BUS DRIVER.
SN74CB3T3125PWRG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
SN74CB3T3125PWRG4 Applications
There are a lot of Texas Instruments SN74CB3T3125PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Data distribution
- Frequency multiplexing system
- Microprocessor memory systems
- RF-based home automation system
- D/A converters
- Make full adder
- Paper plants
- Automation system
- Solenoid cooling fan
