Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-VFQFN Exposed Pad |
Number of Pins |
14 |
Weight |
32.205058mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
8Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CB3T3125 |
Pin Count |
14 |
Number of Elements |
4 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
9 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
9 ns |
Family |
CB3T/3VT |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
100MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1mm |
Length |
3.5mm |
Width |
3.5mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CB3T3125RGYR Overview
As a means of saving space, digital switch is provided in the 14-VFQFN Exposed Pad.Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.There is a design for terminating 14 as part of its basic configuration.As its base part number is 74CB3T3125, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 14 component pins.Single is used as its supply type.It is configured with 14 pins.The mounting point is Surface Mount.In the CB3T/3VT family, the logic switch is included.In this signal multiplexer, there are 1 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.For mux switch's normal operation, power supply 2.5/3.3V is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without any external influences, it consumes 20μA current of multiplexer ic at all times.In accordance with TR, switches can be packaged.A resistance of 2 governs its operation.The system operates with a resistance of 8Ohm.It contains 4 elements in mux switch configuration.The output current of 64mA is provided for higher switches' flexibility.
SN74CB3T3125RGYR Features
Supplied in the 14-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3125RGYR Applications
There are a lot of Texas Instruments SN74CB3T3125RGYR Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- A/D converters
- High-performance memory-decoding applications
- Steel plants
- Analog, digital or video signal switching
- Arithmetic Logic Units
- Data bus control
- Relay
- CNC machines
- Electronics industry