SN74CB3T3245DWR

20 Terminations2.3V~3.6V 20 Pin 74CB3T3245 Signal switch74CB Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3T3245DWR
Package: 20-SOIC (0.295, 7.50mm Width)
Datasheet: -
Stock: 272
Description: 20 Terminations2.3V~3.6V 20 Pin 74CB3T3245 Signal switch74CB Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	500.709277mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	8.5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74CB3T3245
Pin Count	20
Circuit	8 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	40μA
Output Current	64mA
Number of Bits	8
Throw Configuration	SPST
Propagation Delay	10.5 ns
Quiescent Current	40μA
Turn On Delay Time	10.5 ns
Family	CB3T/3VT
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	100MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.02mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Height	2.65mm
Length	12.8mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CB3T3245DWR Overview

Digital switch is provided in the 20-SOIC (0.295, 7.50mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 20 range.There is a base part number of 74CB3T3245 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 2.5V voltage is supplied.Signal switch has 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.There are 8 bits signal multiplexer provides.Vsup should be kept at 2.3V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 40μA current of multiplexer ic since it is not affected by external factors.TR is used to package the switches.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 8.5Ohm.Additionally, ALSO OPERATES AT 3.3V SUPPLY has improved characteristics.The output current of 64mA is provided for higher switches' flexibility.