SN74CB3T3245PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CB3T3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 2.5V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 40μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 40μA |
| Turn On Delay Time | 10.5 ns |
| Family | CB3T/3VT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.02mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Drain to Source Resistance | 5Ohm |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T3245PW Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CB series, they can be used in a wide variety of applications.This configuration includes 20 terminations as part of its basic functionality.In addition, it also has a base part number of 74CB3T3245, which can be used to find related parts.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 20 components that can be connected to each pin.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.This multiplexer ic is configured with 20 pins.The mounting is in the way of Surface Mount.In the CB3T/3VT family, the logic switch is included.Signal multiplexer consists of 8 bits.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.No external influence consumes 40μA current of multiplexer ic.Providing a supply voltage of 2.5V can provide reliable performance of the multiplexers.This multiplexer provides 8 inputs.As far as the resistance is concerned, it operates with 2.5Ohm is the resistance at which it operates.Also, it provides an improved version of the characteristics of ALSO OPERATES AT 3.3V SUPPLY.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CB3T3245PW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply voltage of 2.5V
ALSO OPERATES AT 3.3V SUPPLY
SN74CB3T3245PW Applications
There are a lot of Texas Instruments SN74CB3T3245PW Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Data demultiplexing
- Injectors
- Combinational circuit
- War field flying robot with a night vision flying camera
- A/D converters
- Control unit of Central Processing unit (CPU)
- Telephone network
- Electronic circuits
- Implementing boolean functions with multiple variables
