SN74CB3T3245PWE4
| Parameters | |
|---|---|
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Resistance | 8.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 40μA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 40μA |
| Turn On Delay Time | 10.5 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
SN74CB3T3245PWE4 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.The package is packaged in the manner of Rail/Tube.The basic configuration includes 20 terminations.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 20 is found on this turn signal switch.As the end of conductors, it uses GULL WING.Single is used as its supply type.A configuration of 20 pins is used.Surface Mount is the way it is mounted.The logic switch belongs to the family of CB3T/3VT.In this signal multiplexer, there are 8 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 40μA current of multiplexer ic.A resistance of 2 governs its operation.With a resistance of 8.5Ohm, it operates.There is no problem with operating this signal switch at the maximum temperature of 85°C.Temperatures of the multiplexer should be kept at -40°C.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.A minimum supply voltage of 2.3V is required to operate the digital swith.In addition, it provides improved features of ALSO OPERATES AT 3.3V SUPPLY.IC BUS DRIVER is used for the logic of this chip.
SN74CB3T3245PWE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
BUS DRIVER as the logic IC
SN74CB3T3245PWE4 Applications
There are a lot of Texas Instruments SN74CB3T3245PWE4 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Communication system
- Speed control of medern motors
- Encrypted communications system
- RF-based home automation system
- Textile mills
- Data-routing applications
- Automatic health monitoring systems
- Computer memory
- Microprocessor instruction decoding
