SN74CB3T3245PWG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Resistance | 8.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 40μA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 40μA |
| Turn On Delay Time | 250 ps |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3T3245PWG4 Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.This configuration includes 20 terminations as part of its basic functionality.The multiplexer's system is supplied with a voltage of 2.5V.In this turn signal switch, there are 20 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 20 pins.It is positioned in the direction of Surface Mount.The CB3T/3VT family includes the logic switch.There are 8 bits in signal multiplexer.In order for 2.5/3.3V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.No external influence consumes 40μA current of multiplexer ic.The switches packaging is based on TUBE.The resistance is 2.8.5Ohm is the resistance at which it operates.In this case, operating this signal switch at 85°C is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.A minimum supply voltage of 2.3V is required to operate the digital swith.Furthermore, the characteristics of ALSO OPERATES AT 3.3V SUPPLY have been improved.A logic IC based on BUS DRIVER is employed in this system.
SN74CB3T3245PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
BUS DRIVER as the logic IC
SN74CB3T3245PWG4 Applications
There are a lot of Texas Instruments SN74CB3T3245PWG4 Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Code converters
- Metal detectors
- HD surveillance system
- Memory chips
- Automatic health monitoring systems
- War field flying robot with a night vision flying camera
- Logic gates for other digital devices
- Steel plants
- Used to connect a single source to multiple destinations
