SN74CB3T3245PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Resistance | 8.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 40μA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 40μA |
| Turn On Delay Time | 10.5 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3T3245PWRE4 Overview
This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.The package is packaged in the manner of Tape and Reel.The basic configuration of this system includes 20 terminations.The multiplexer's system is powered by 2.5V voltage.Signal switch has 20 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.This multiplexer ic is configured with 20 pins.The mounting is in the way of Surface Mount.The CB3T/3VT family includes the logic switch.There are 8 bits signal multiplexer provides.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.No external influence consumes 40μA current of multiplexer ic.In accordance with TR, switches can be packaged.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 8.5Ohm.85°C is an acceptable maximum temperature for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.Typical device specifications specify a voltage supply of 2.3V for the digital swith.In addition, it provides improved features of ALSO OPERATES AT 3.3V SUPPLY.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CB3T3245PWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
BUS DRIVER as the logic IC
SN74CB3T3245PWRE4 Applications
There are a lot of Texas Instruments SN74CB3T3245PWRE4 Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Automation system
- GLAN
- HDMI applications
- To select different devices in microprocessor input
- Transmission from the computer system of a satellite
- Make half adder
- A robotic vehicle with the metal detector
- VGA
- Night vision cameras
