SN74CB3T3253DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3T3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Throw Configuration | SP4T |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 10.5 ns |
| Family | CB3T/3VT |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T3253DR Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Since they are members of the 74CB series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74CB3T3253 which can also be used in order to locate the logic switch that are related to this item.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.As a type of supply, Single is employed.The board has 16 pins configured.The mounting is in the way of Surface Mount.The CB3T/3VT family includes the logic switch.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is a part of an electronic system classified as Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.The switches packaging is based on TR.With a resistance of 8Ohm, it operates.2 circuits are formed for the normal operation of the digitalswitch.
SN74CB3T3253DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74CB3T3253DR Applications
There are a lot of Texas Instruments SN74CB3T3253DR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Make half adder
- Relay
- Audio transmission
- Logic circuits
- Time division multiplexing system
- Logic gates for other digital devices
- Night vision cameras
- Encrypted communications system
- Arithmetic Logic Units
