SN74CB3T3253PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3T3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Nominal Supply Current | 20μA |
| Number of Bits | 2 |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 10.5 ns |
| Family | CB3T/3VT |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T3253PW Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.Multiplexers of the 74CB series can be used in a wide range of applications.Among its basic features are 16 terminations.There is a base part number 74CB3T3253 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 2.5V volts.Signal switch has 16 component pins.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.A configuration of 16 pins is used.It is positioned in the direction of Surface Mount.There is a family of CB3T/3VT members.As a result, signal multiplexer provides 2 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In order for the turn signal switch to work, there are 4 outputs.The digital switch ic is a part of an electronic system classified as Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.This multiplexer provides 8 inputs.A resistance of 8Ohm is used to operate it.
SN74CB3T3253PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3T3253PW Applications
There are a lot of Texas Instruments SN74CB3T3253PW Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Used to connect a single source to multiple destinations
- Small scale TV wall
- Data bus control
- Analog to digital conversion
- Medium scale TV wall
- Video transmission
- A robotic vehicle with the metal detector
- War field flying robot with a night vision flying camera
- Enabling block of memory depending on address in memory chips
