Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
16 |
Weight |
61.887009mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Resistance |
8Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Pin Count |
16 |
Number of Outputs |
4 |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.3V |
Nominal Supply Current |
20μA |
Number of Bits |
2 |
Propagation Delay |
250 ps |
Quiescent Current |
20μA |
Turn On Delay Time |
10.5 ns |
Family |
CB3T/3VT |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
MULTIPLEXER AND DEMUX/DECODER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74CB3T3253PWRE4 Overview
This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.The package is packaged in the manner of Tape and Reel.The basic configuration includes 16 terminations.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 16 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.The board has 16 pins configured.Surface Mount is the way it is mounted.Among the family of CB3T/3VT the logic switch is a member.In the signal multiplexer, there are 2 bits available.There are 4 outputs designed to operate the turn signal switch.Other Logic ICs is the classification for this the digital switch ic.It consumes 20μA current of multiplexer ic since it is not affected by external factors.The multiplexer is equipped with 8 inputs.As far as the resistance is concerned, it operates with 8Ohm.Signal switch operation at 85°C temperature is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.A logic IC based on MULTIPLEXER AND DEMUX/DECODER is employed in this system.
SN74CB3T3253PWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
MULTIPLEXER AND DEMUX/DECODER as the logic IC
SN74CB3T3253PWRE4 Applications
There are a lot of Texas Instruments SN74CB3T3253PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Signal router
- A robotic vehicle with the metal detector
- CPU memory location identification
- HDMI applications
- D/A converters
- Audio transmission
- PCIe
- Make half adder
- Control unit of Central Processing unit (CPU)