SN74CB3T3257DGVR
| Parameters | |
|---|---|
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3T3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Number of Bits | 4 |
| Throw Configuration | SPDT |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 9.5 ns |
| Family | CB3T/3VT |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
SN74CB3T3257DGVR Overview
As a means of saving space, digital switch is provided in the 16-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Since they are members of the 74CB series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number 74CB3T3257 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 2.5V voltage.There are 16 component pins in this turn signal switch.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.It is configured with 16 pins.The mounting point is Surface Mount.Among the family of CB3T/3VT the logic switch is a member.In this signal multiplexer, there are 4 bits that are provided.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.The turn signal switch has 2 outputs.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.No external influence consumes 20μA current of multiplexer ic.The multiplexer is equipped with 8 inputs.The switches package is packaged in accordance with TR.The resistance of the signal switching is 8Ohm.Normally, the digitalswitch consists of 2 circuits.
SN74CB3T3257DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CB3T3257DGVR Applications
There are a lot of Texas Instruments SN74CB3T3257DGVR Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Idle motor
- LVDS
- A robotic vehicle with the metal detector
- Enabling different functions units in microprocessor instruction decoding
- Used to connect a single source to multiple destinations
- Code converters
- Enabling block of memory depending on address in memory chips
- Audio transmission
- Relay
