Parameters |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.02mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Drain to Source Resistance |
5Ohm |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
8Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
74CB3T3257 |
Pin Count |
16 |
Number of Outputs |
2 |
Circuit |
4 x 2:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Nominal Supply Current |
20μA |
Number of Bits |
4 |
Propagation Delay |
9.5 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
9.5 ns |
Family |
CB3T/3VT |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
SN74CB3T3257PW Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CB series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.As its base part number is 74CB3T3257, logic switch can also be used to find its related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.A total of 16 pins are configured on this board.It is positioned in the direction of Surface Mount.There is a family of CB3T/3VT members.Signal multiplexer contains 4 bits.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.It is provided that 2.5/3.3V has a power supply in order to function normally.As a result, the turn signal switch consists of 2 outputs.Without the influence of external factors, it consumes 20μA current of multiplexer ic.A multiplexer such as this has 8 inputs available.A resistance of 8Ohm is used to operate it.
SN74CB3T3257PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3257PW Applications
There are a lot of Texas Instruments SN74CB3T3257PW Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- HDMI applications
- Image transmission
- Enabling different functions units in microprocessor instruction decoding
- CPU memory location identification
- LVDS
- VGA
- D/A converters
- Transmission from the computer system of a satellite
- Automation system