banner_page

SN74CB3T3257PWG4

16 Terminations16 Pin Signal switch2 Outputs4 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CB3T3257PWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 594
  • Description: 16 Terminations16 Pin Signal switch2 Outputs4 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Nominal Supply Current 20μA
Number of Bits 4
Propagation Delay 9.5 ns
Quiescent Current 20μA
Turn On Delay Time 9.5 ns
Family CB3T/3VT
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Logic IC Type MULTIPLEXER AND DEMUX/DECODER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 1
Height 1.15mm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case TSSOP
Number of Pins 16
Weight 61.887009mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
Resistance 8Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Other Logic ICs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Pin Count 16
Number of Outputs 2
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL

SN74CB3T3257PWG4 Overview


Digital switch is provided in the TSSOP for the purpose of saving board space.Rail/Tube is the method used for packaging.There are 16 terminations included in its basic configuration.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CB3T/3VT.Signal multiplexer consists of 4 bits.A power supply is provided for mux switch's normal operation of 2.5/3.3V.As part of the operation of this turn signal switch, there are 2 outputs.This is a signal switch that is categorized as Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.It is provided with 8 inputs.With a resistance of 8Ohm, it operates.The maximum operating temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.MULTIPLEXER AND DEMUX/DECODER is the logic integrated circuit used in the digitalswitch.

SN74CB3T3257PWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
MULTIPLEXER AND DEMUX/DECODER as the logic IC

SN74CB3T3257PWG4 Applications


There are a lot of Texas Instruments SN74CB3T3257PWG4 Signal Switches / Multiplexers / Decoders applications.

  • CPU memory location identification
  • Control unit of Central Processing unit (CPU)
  • Microprocessor instruction decoding
  • Night vision cameras
  • Code conversion
  • Arithmetic Logic Units
  • Data bus control
  • Microprocessor memory systems
  • Logic circuits
  • Decimal decoder

Write a review

Note: HTML is not translated!
    Bad           Good