SN74CB3T3257PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 20μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 9.5 ns |
| Family | CB3T/3VT |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.02mA |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3T3257PWRE4 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.The package is packaged in the manner of Tape and Reel.Its basic configuration includes terminations in the 16 range.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThere are 16 component pins in this turn signal switch.A conductor terminates at GULL WING.In this case, the supply type is Single.It is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.In this signal multiplexer, there are 4 bits provided.For mux switch's normal operation, power supply 2.5/3.3V is provided.This turn signal switch has 2 outputs designed for its operation.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.It consumes 20μA current of multiplexer ic since it is not affected by external factors.This multiplexer has 8 inputs.The switches packaging is based on TR.8Ohm is the resistance at which it operates.Signal switchs at temperatures up to 85°C are acceptable.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.IC MULTIPLEXER AND DEMUX/DECODER is used for the logic of this chip.
SN74CB3T3257PWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
SN74CB3T3257PWRE4 Applications
There are a lot of Texas Instruments SN74CB3T3257PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Automatic health monitoring systems
- Data-routing applications
- Automation system
- Data transfer
- Frequency multiplexing system
- Logic gates for other digital devices
- Decimal decoder
- War field flying robot with a night vision flying camera
- Encrypted communications system
