SN74CB3T3306DCUR

8 Terminations2.3V~3.6V 8 Pin 74CB3T3306 Signal switch74CB Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CB3T3306DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 106
Description: 8 Terminations2.3V~3.6V 8 Pin 74CB3T3306 Signal switch74CB Series 2 Functions(Kg)

Details

Tags

Parameters
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	74CB3T3306
Pin Count	8
Circuit	1 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Number of Channels	2
Number of Ports	2
Output Current	64mA
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	9 ns
Quiescent Current	20μA
Turn On Delay Time	9 ns
Family	CB3T/3VT
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	100MHz
Nominal Input Voltage	1.7V
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CB
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Bus Switch
Resistance	8Ohm
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260

SN74CB3T3306DCUR Overview

Due to the fact that it is provided in the 8-VFSOP (0.091, 2.30mm Width), digital switch allows the board to be compacted.Cut Tape (CT) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CB series can be used for a wide range of applications.It is designed with 8 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CB3T3306 may also be used.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.It is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CB3T/3VT family.In the signal multiplexer, there are 1 bits available.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.Without any external influences, it consumes 20μA current of multiplexer ic at all times.In accordance with TR, switches can be packaged.The resistance of the signal switching is 2.The system operates with a resistance of 8Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.In addition, ALSO OPERATES AT 3.3V SUPPLY exhibits improved characteristics.For greater switches' flexibility, the output current of 64mA is provided.