SN74CB3T3383DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CB |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus FET Exchange Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CB3T3383 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Max Output Current | 64mA |
| Circuit | 5 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 15 ns |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CB3T3383DW Overview
In order to save board space, digital switch is located in the 24-SOIC (0.295, 7.50mm Width).Tube is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CB series can be used for a wide range of applications.The basic configuration of this system includes 24 terminations.There is a base part number of 74CB3T3383 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 2.5V voltage.Signal switch has 24 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.There are 24 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of CB3T/3VT.In this signal multiplexer, there are 2 bits that are provided.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.The power supply of 2.5/3.3V is provided for mux switch's normal operation.As part of the operation of this turn signal switch, there are 10 outputs.This is an the digital switch ic that is classified as Other Logic ICs.Without external influences, it consumes 20μA current of multiplexer ic.As far as the resistance is concerned, it operates with 4.It operates with a resistance of 5Ohm.64mA provides a high degree of switches' flexibility.
SN74CB3T3383DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3383DW Applications
There are a lot of Texas Instruments SN74CB3T3383DW Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Arithmetic Logic Units
- Analog, digital or video signal switching
- Computer memory
- Night vision cameras
- Electronically controlled engine system
- HD surveillance system
- Enabling different rows of memory depending on address in memory chips
- To select different devices in microprocessor output
- To select different devices in microprocessor input
