Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
5Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
5 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CB3T3383 |
Pin Count |
24 |
Number of Outputs |
10 |
Circuit |
5 x 2:2 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
4 |
Number of Bits |
2 |
Throw Configuration |
DPDT |
Propagation Delay |
250 ps |
Quiescent Current |
20μA |
Turn On Delay Time |
15 ns |
Family |
CB3T/3VT |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.02mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CB3T3383PWR Overview
Digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CB series can be used for a wide range of applications.Its basic configuration includes terminations in the 24 range.The part number for 74CB3T3383 can be used to find its logic switch related parts as well.The multiplexer is supplied with 2.5V voltage.A component pin count of 24 is found on this turn signal switch.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CB3T/3VT family.As a result, signal multiplexer provides a total of 2 bits.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 2.5/3.3V to operate normally, a power supply is provided.The turn signal switch has 10 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.TR is used to package the switches.The resistance is 4.With a resistance of 5Ohm, it operates.
SN74CB3T3383PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3383PWR Applications
There are a lot of Texas Instruments SN74CB3T3383PWR Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Textile mills
- Computer memory
- Arithmetic Logic Units
- Automation system
- Solenoid cooling fan
- HD surveillance system
- A/D converters
- Medium scale TV wall
- Logic circuits