SN74CBT16210CDL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 20 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT16210 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16210CDL Overview
In order to conserve board space, digital switch is included in the 48-BSSOP (0.295, 7.50mm Width).It is packaged according to the Tube method.Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration includes 48 terminations.You can also find related parts by using its logic switch base part number of 74CBT16210.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 48 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 48 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 20 bits available.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.A resistance of 12Ohm is used to operate it.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT16210CDL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16210CDL Applications
There are a lot of Texas Instruments SN74CBT16210CDL Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Automation system
- High-performance memory-decoding applications
- Idle motor
- Data transfer
- War field flying robot with a night vision flying camera
- Speed synchronization of multiple motors in industries
- Make half adder
- To select different devices in microprocessor output
- Paper plants
