banner_page

SN74CBT16210DGGR

48 Terminations4.5V~5.5V 48 Pin 74CBT16210 Signal switch74CBT Series 2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBT16210DGGR
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 129
  • Description: 48 Terminations4.5V~5.5V 48 Pin 74CBT16210 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Weight 223.195796mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CBT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Subcategory Bus Driver/Transceivers
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number 74CBT16210
Pin Count 48
Operating Supply Voltage 5V
Circuit 10 x 1:1
Polarity Non-Inverting
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 3μA
Output Current 64mA
Number of Bits 20
Throw Configuration SPST
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 9.3 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
High Level Output Current -128mA
Low Level Output Current 128mA
Power Supply Current-Max (ICC) 0.003mA
Voltage Supply Source Single Supply
Independent Circuits 2
Count Direction BIDIRECTIONAL
Translation N/A
Height 1.2mm
Length 12.5mm
Width 6.1mm
Thickness 1.15mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74CBT16210DGGR Overview


In order to conserve board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.It is designed with 48 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT16210.The multiplexer's system works with 5V voltage.There are 48 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.The board has 48 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 20 bits that are provided.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.TR is used to package the switches.This signal switching operates at a resistance of 2.A resistance of 7Ohm is used to operate it.For higher switches' flexibility, 64mA is provided as an output current.

SN74CBT16210DGGR Features


Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16210DGGR Applications


There are a lot of Texas Instruments SN74CBT16210DGGR Signal Switches / Multiplexers / Decoders applications.

  • Metal detectors
  • Code converters
  • Speed control of medern motors
  • Seven segment displays
  • Enabling different rows of memory depending on address in memory chips
  • Implementing boolean functions with multiple variables
  • Data-routing applications
  • LVDS
  • Microprocessor memory systems
  • Data distribution

Write a review

Note: HTML is not translated!
    Bad           Good