Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
48 |
Weight |
123.490523mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBT16210 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
20 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
9.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
9.7mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16210DGVR Overview
Due to the fact that it is provided in the 48-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74CBT series multiplexers.Among its basic configurations are 48 terminations.The base part number is 74CBT16210, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.Signal switch has 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.The board is configured with 48 pins.It is positioned in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer contains 20 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.Normally, 5V is powered by a battery.Bus Driver/Transceivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 3μA current.Using a supply voltage of 5V can result in reliable performance of the multiplexers.Currently, the switches is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 2.7Ohm is the resistance at which it operates.For greater switches' flexibility, 64mA provides the output current.
SN74CBT16210DGVR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16210DGVR Applications
There are a lot of Texas Instruments SN74CBT16210DGVR Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Data transfer
- Transmission from the computer system of a satellite
- High-performance memory systems
- Data-routing applications
- Logic gates for other digital devices
- Computer memory
- Solenoid cooling fan
- Microprocessor instruction decoding
- Robotic vehicles