Parameters |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
9.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT16210 |
Pin Count |
48 |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
20 |
Throw Configuration |
SPST |
SN74CBT16210DL Overview
It is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save board space.In this case, it is packaged as Tube.Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration of this system includes 48 terminations.Its logic switch base part number is 74CBT16210 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.A total of 48 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 20 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).During mux switch's normal operation, 5V is provided with a power supply.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 7Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT16210DL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16210DL Applications
There are a lot of Texas Instruments SN74CBT16210DL Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- Used to connect a single source to multiple destinations
- Encrypted communications system
- Code conversion
- Data-routing applications
- Night vision cameras
- Analog to digital conversion
- Make half adder
- Video transmission
- CNC machines