SN74CBT16210DLR

48 Terminations4.5V~5.5V 48 Pin 74CBT16210 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16210DLR
Package: 48-BSSOP (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 194
Description: 48 Terminations4.5V~5.5V 48 Pin 74CBT16210 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-BSSOP (0.295, 7.50mm Width)
Number of Pins	48
Weight	600.301152mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74CBT16210
Pin Count	48
Operating Supply Voltage	5V
Circuit	10 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	20
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	9.3 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.79mm
Length	15.88mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT16210DLR Overview

Digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width) for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration of this system includes 48 terminations.You can also find related parts by using its logic switch base part number of 74CBT16210.The turn signal switch is supplied with a voltage of 5V volts.There are 48 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic is configured with 48 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 20 bits provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).During mux switch's normal operation, 5V is provided with a power supply.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.The system operates with a resistance of 2.In terms of resistance, it has a value of 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility.