SN74CBT16211ADGGR

56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16211ADGGR
Package: 56-TFSOP (0.240, 6.10mm Width)
Datasheet: -
Stock: 291
Description: 56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Number of Pins	56
Weight	252.792698mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74CBT16211
Pin Count	56
Operating Supply Voltage	5V
Circuit	12 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	24
Throw Configuration	SPST
Propagation Delay	9.3 ns
Quiescent Current	3μA
Turn On Delay Time	9.3 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	14mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No

SN74CBT16211ADGGR Overview

As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 56 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBT16211 may also be used.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 56 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.The board is configured with 56 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer consists of 24 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.According to TR, the switches is packaged.2 is the resistance at which it operates.It operates with a resistance of 7Ohm.For greater switches' flexibility, 64mA provides the output current.