SN74CBT16211ADGVR

56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16211ADGVR
Package: 56-TFSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 653
Description: 56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74CBT16211
Pin Count	56
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Circuit	12 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	24
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	9.3 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	11.3mm
Width	4.4mm
Thickness	1.05mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.173, 4.40mm Width)
Number of Pins	56
Weight	145.007811mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active

SN74CBT16211ADGVR Overview

Digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged in the way of Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBT series are suitable for a wide range of applications.There are 56 terminations included in its basic configuration.As its base part number is 74CBT16211, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 56 component pins in this turn signal switch.GULL WING represents the end of conductors.Single is used as its supply type.It is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 24 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.The power supply of 5V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without any external influences, it consumes 3μA current of multiplexer ic at all times.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 7Ohm.For greater switches' flexibility, the output current of 64mA is provided.