SN74CBT16211ADL

56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16211ADL
Package: 56-BSSOP (0.295, 7.50mm Width)
Datasheet: -
Stock: 810
Description: 56 Terminations4.5V~5.5V 56 Pin 74CBT16211 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Address Bus Width	24b
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.79mm
Length	18.41mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-BSSOP (0.295, 7.50mm Width)
Number of Pins	56
Weight	694.790113mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Termination	SMD/SMT
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74CBT16211
Pin Count	56
Operating Supply Voltage	5V
Circuit	12 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	24
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	9.3 ns
Family	CBT/FST/QS/5C/B

SN74CBT16211ADL Overview

It is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save board space.In this case, it is packaged as Tube.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74CBT series multiplexers.As parts of its basic configuration, 56 terminations are desgined.The part number for 74CBT16211 can be used to find its logic switch related parts as well.The multiplexer is supplied with 5V voltage.This turn signal switch contains 56 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.A total of 56 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer provides 24 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.In order to maintain mux switch's normal operation, power is provided to 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.No external influence consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.This signal switching operates at a resistance of 2.In terms of resistance, it has a value of 7Ohm.For higher switches' flexibility, the output current is set to 64mA.