SN74CBT16211AZQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT16211AZQLR Overview
Digital switch is provided in the 56-VFBGA for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 56 terminations are designed as a part of it.In addition, it also has a base part number of 74CBT16211, which can be used to find related parts.The multiplexer's system is powered by 5V volts.A component pin count of 56 can be found on this turn signal switch.Using the point BALL as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.A configuration of 56 pins is used.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 24 bits that are provided.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.A resistance of 2 governs its operation.In terms of resistance, it has a value of 9Ohm.
SN74CBT16211AZQLR Features
Supplied in the 56-VFBGA package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT16211AZQLR Applications
There are a lot of Texas Instruments SN74CBT16211AZQLR Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Signal router
- Make full adder
- Solenoid cooling fan
- Data distribution
- Data bus control
- Paper plants
- Data communication
- Speed control of medern motors
- Night vision cameras
