SN74CBT16211CDGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT16211 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.15 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16211CDGVR Overview
For the purpose of saving board space, digital switch is included in the 56-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBT series can be used in a wide range of applications.Its basic configuration includes terminations in the 56 range.You can also find related parts by using its logic switch base part number of 74CBT16211.The multiplexer's system is powered by 5V voltage.There are 56 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.The board has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 24 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order for 5V to operate normally, a power supply is provided.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.TR is used to package the switches.The signal switching operates with a resistance of 2.A resistance of 12Ohm is used to operate the signal switching.Furthermore, the characteristics of DUMMY VAL have been improved.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT16211CDGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
DUMMY VAL
SN74CBT16211CDGVR Applications
There are a lot of Texas Instruments SN74CBT16211CDGVR Signal Switches / Multiplexers / Decoders applications.
- Code converters
- RF-based home automation system
- LVDS
- Enabling block of memory depending on address in memory chips
- CNC machines
- Image transmission
- Logic circuits
- Communication system
- Microprocessor input/output systems
- Audio transmission
