Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
56 |
Weight |
145.007811mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
14Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
TTL COMPATIBLE BUS SWITCH |
Subcategory |
Other Logic ICs |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBT16212 |
Pin Count |
56 |
Operating Supply Voltage |
5V |
Circuit |
12 x 2:2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
4 |
Nominal Supply Current |
250mA |
Output Current |
64mA |
Number of Bits |
12 |
Throw Configuration |
DPDT |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
10.4 ns |
Family |
CBT/FST/QS/5C/B |
Number of Inputs |
24 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16212ADGVR Overview
Providing this information in the 56-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus FET Exchange Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 56 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT16212.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 56 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.Currently, it is configured with 56 pins.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides 12 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 24 inputs.The system operates with a resistance of 4.14Ohm is the resistance at which it operates.Additionally, TTL COMPATIBLE BUS SWITCH provides improved characteristics.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT16212ADGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
SN74CBT16212ADGVR Applications
There are a lot of Texas Instruments SN74CBT16212ADGVR Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Injectors
- Code conversion
- Code converters
- Make full adder
- Robotic vehicles
- Signal router
- Telephone network
- Idle motor
- Time division multiplexing system