Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
8Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT16212 |
Pin Count |
56 |
Operating Supply Voltage |
5V |
Circuit |
12 x 2:2 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
4 |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
DPDT |
Propagation Delay |
150 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
SN74CBT16212CDLR Overview
In order to conserve board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.Bus FET Exchange Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 56 terminations.Its logic switch base part number is 74CBT16212 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.There are 56 component pins in this turn signal switch.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.There are 56 pins on it.The mount is in Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer provides 24 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.Other Logic ICs is the classification for this the digital switch ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.According to TR, the switches is packaged.The system operates with a resistance of 4.The resistance of the signal switching is 8Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT16212CDLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16212CDLR Applications
There are a lot of Texas Instruments SN74CBT16212CDLR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Signal router
- Microprocessor input/output systems
- High-performance memory-decoding applications
- Frequency multiplexing system
- Encrypted communications system
- Data distribution
- Enabling block of memory depending on address in memory chips
- Time division multiplexing system
- Textile mills