Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
22Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT16213 |
Pin Count |
56 |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
12 x 2:2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
4 |
Nominal Supply Current |
250mA |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
DPDT |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
12.8 ns |
Family |
CBT/FST/QS/5C/B |
Number of Inputs |
24 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
2.79mm |
Width |
7.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16213DL Overview
This is a relatively small item of digital switch that is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save space on the board.It is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus FET Exchange Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.It is designed with 56 terminations as part of its basic configuration.Its logic switch base part number is 74CBT16213 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.This turn signal switch has 56 component pins.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.Currently, it is configured with 56 pins.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 24 bits.Vsup should be kept at 4V to prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 3μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is provided with 24 inputs.A resistance of 4 is used to operate the signal switching.With a resistance of 22Ohm, it operates.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT16213DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16213DL Applications
There are a lot of Texas Instruments SN74CBT16213DL Signal Switches / Multiplexers / Decoders applications.
- Data communication
- VGA
- Robotic vehicles
- High-performance memory systems
- Code conversion
- Combinational circuit
- Automatic health monitoring systems
- Enabling different functions units in microprocessor instruction decoding
- Electronics industry
- Make full adder