SN74CBT16213DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus FET Exchange Switch |
| Resistance | 22Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT16213 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 2:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.79mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT16213DLR Overview
As a means of saving space, digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus FET Exchange Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sWith the 74CBT series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 56 terminations.Its logic switch base part number is 74CBT16213 which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 56 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The board has 56 pins configured.This unit is mounted in the way of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.As a result, signal multiplexer provides 24 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order for 5V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Other Logic ICs.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The resistance of the signal switching is 4.A resistance of 22Ohm is used to operate it.For greater switches' flexibility, 64mA provides the output current.
SN74CBT16213DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16213DLR Applications
There are a lot of Texas Instruments SN74CBT16213DLR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Data demultiplexing
- Data transfer
- Data collection system
- Transmission from the computer system of a satellite
- Electronics industry
- Electronically controlled engine system
- Automatic health monitoring systems
- Microprocessor instruction decoding
- Medical industry
