SN74CBT16214CDL
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT16214 |
| Pin Count | 56 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:3 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.5 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
SN74CBT16214CDL Overview
This is a relatively small item of digital switch that is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save space on the board.In this case, it is packaged as Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 56 terminations are desgined.To find signal switch's related components, a base part number of 74CBT16214 may also be used.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.The board has 56 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 12 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.In order for the turn signal switch to work, there are 3 outputs.This is a signal switch that is categorized as Other Logic ICs.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The resistance of the signal switching is 10Ohm.Stability of the multiplexers can be kept when the supply voltage of 3μA is delivered to the load.
SN74CBT16214CDL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT16214CDL Applications
There are a lot of Texas Instruments SN74CBT16214CDL Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- To select different devices in microprocessor input
- Code conversion
- Analog, digital or video signal switching
- Memory system of computers
- Small scale TV wall
- Logic circuits
- Data bus control
- Data-routing applications
- Enabling different rows of memory depending on address in memory chips
