SN74CBT162292DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 39Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT162292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 1.85 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 64mA |
| Supply Type | Single |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT162292DGGR Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.240, 6.10mm Width).The package is in the form of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 56 terminations are designed as a part of it.There is a base part number of 74CBT162292 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 56 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.A configuration of 56 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 12 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 2 outputs.The part belongs to the Other Logic ICs category of signal switches.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches is packaged according to the way of TR.It operates with a resistance of 39Ohm.
SN74CBT162292DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT162292DGGR Applications
There are a lot of Texas Instruments SN74CBT162292DGGR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- VGA
- Automatic health monitoring systems
- To select different task for memory in microprocessor memory systems
- GLAN
- Transmission from the computer system of a satellite
- Code conversion
- Used to connect a single source to multiple destinations
- Night vision cameras
- Analog to digital conversion
