SN74CBT162292DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 39Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT162292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 1.85 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 64mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT162292DGVR Overview
Due to the fact that it is provided in the 56-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.Its basic configuration includes terminations in the 56 range.As its base part number is 74CBT162292, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 56 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.With 56 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 12 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order for 5V to operate normally, a power supply is provided.There are 2 outputs designed for the operation of the turn signal switch.Other Logic ICs is a category for the digital switch ics.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.39Ohm is the resistance at which it operates.
SN74CBT162292DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT162292DGVR Applications
There are a lot of Texas Instruments SN74CBT162292DGVR Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Memory chips
- Microprocessor instruction decoding
- Time division multiplexing system
- To select different devices in microprocessor output
- CNC machines
- A robotic vehicle with the metal detector
- CPU memory location identification
- Speed synchronization of multiple motors in industries
- Microprocessor memory systems
