Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
63Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
12 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT162292 |
Pin Count |
56 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Circuit |
12 x 1:2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Operating Supply Current |
3μA |
Load Capacitance |
50pF |
Number of Bits |
12 |
Throw Configuration |
SPDT |
Propagation Delay |
1.85 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
10.9 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
15mA 64mA |
Supply Type |
Single |
Bandwidth |
200MHz |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT162292DL Overview
For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).Tube is the packaging method.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.Its basic configuration includes terminations in the 56 range.As its base part number is 74CBT162292, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.This turn signal switch consists of 56 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.The board is configured with 56 pins.It is positioned in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer provides 12 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.There is a power supply provided for the mux switch's normal operation of 5V.For the turn signal switch's operation, there are 2 outputs.Other Logic ICs is a category for the digital switch ics.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 63Ohm.When the load is supplied with a voltage of 3μA, stability of the multiplexers can be maintained.
SN74CBT162292DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT162292DL Applications
There are a lot of Texas Instruments SN74CBT162292DL Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Computer memory
- Small scale TV wall
- Microprocessor instruction decoding
- Memory system of computers
- Logic circuits
- Night vision cameras
- Microprocessor input/output systems
- Enabling different functions units in microprocessor instruction decoding
- Home automation system