SN74CBT16233DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BUS SWITCH |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 16 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT16233 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 16 x 1:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 16 |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 32 |
| Propagation Delay | 5.3 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.3 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16233DGGR Overview
Due to the fact that it is provided in the 56-TFSOP (0.240, 6.10mm Width), digital switch allows the board to be compacted.It is packaged in the way of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.75V~5.25V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 56 terminations as part of its basic configuration.Its logic switch base part number is 74CBT16233 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch contains 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 56 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 32 bits that are provided.A power supply is provided for mux switch's normal operation of 5V.The turn signal switch contains 2 outputs designed to operate.This is an the digital switch ic that is classified as Other Logic ICs.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.This signal switching operates at a resistance of 12Ohm.The turn signal switch's circuit has 16 transmission channels.In addition, BUS SWITCH provides improved characteristics.Providing the load with a supply voltage of 3μA can maintain stability of the multiplexers.
SN74CBT16233DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
Operating with the supply current of 3μA
SN74CBT16233DGGR Applications
There are a lot of Texas Instruments SN74CBT16233DGGR Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- Medical industry
- Audio transmission
- Idle motor
- Speed control of medern motors
- Communication system
- RF-based home automation system
- Speed synchronization of multiple motors in industries
- Home automation system
- Analog, digital or video signal switching
