Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Type |
Multiplexer/Demultiplexer |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BUS SWITCH |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
16 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT16233 |
Pin Count |
56 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Circuit |
16 x 1:2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Channels |
16 |
Operating Supply Current |
3μA |
Load Capacitance |
50pF |
Number of Bits |
32 |
Propagation Delay |
5.3 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
5.3 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16233DL Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).The package is packaged in the manner of Tube.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.75V~5.25V, designers have superior flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.The part number for 74CBT16233 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.Currently, this turn signal switch has a total of 56 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.This multiplexer ic is configured with 56 pins.The mount is in Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 32 bits.Normally, 5V is powered by a battery.As part of the operation of this turn signal switch, there are 2 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.With a resistance of 7Ohm, it operates.The turn signal switch's circuit consists of 16 channels that are being used for transmission in the circuit.In addition, it provides improved characteristics compared to BUS SWITCH.If the load is supplied with 3μA voltage, stability of the multiplexers can be maintained.
SN74CBT16233DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
Operating with the supply current of 3μA
SN74CBT16233DL Applications
There are a lot of Texas Instruments SN74CBT16233DL Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Computer memory
- Data bus control
- Steel plants
- Small scale TV wall
- Recording transmission
- Communication system
- Control unit of Central Processing unit (CPU)
- Data collection system
- To select different devices in microprocessor output