Parameters |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBT16244 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Circuit |
4 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
16 |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
5.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
4 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
SN74CBT16244CDLR Overview
As a means of saving space, digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBT series multiplexers.It is designed with 48 terminations as part of its basic configuration.There is a base part number 74CBT16244 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.Signal switch has 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.The board has 48 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 16 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.Normally, 5V is powered by a battery.Bus Driver/Transceivers is a category for the digital switch ics.No external influence consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.Currently, the switches is packaged in accordance with the TR method.The resistance of the signal switching is 2.As far as the resistance is concerned, it operates with 12Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT16244CDLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16244CDLR Applications
There are a lot of Texas Instruments SN74CBT16244CDLR Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Medical industry
- GLAN
- To select different task for memory in microprocessor memory systems
- Microprocessor input/output systems
- Video transmission
- Speed synchronization of multiple motors in industries
- Electronic circuits
- LVDS
- Enabling block of memory depending on address in memory chips