SN74CBT16244DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT16244 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16244DGGR Overview
Digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration includes 48 terminations.As its base part number is 74CBT16244, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V volts.This turn signal switch contains 48 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.The board is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 16 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.For mux switch's normal operation, power supply 5V is provided.Bus Driver/Transceivers is the classification for this the digital switch ic.No external influence consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.According to TR, the switches is packaged.2 is the resistance at which it operates.With a resistance of 7Ohm, it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT16244DGGR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16244DGGR Applications
There are a lot of Texas Instruments SN74CBT16244DGGR Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Combinational circuit
- Video transmission
- Enabling different rows of memory depending on address in memory chips
- Electronic circuits
- To select different task for memory in microprocessor memory systems
- Enabling block of memory depending on address in memory chips
- High-performance memory systems
- To select different devices in microprocessor input
- Automatic Monitoring systems
