Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT16244 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Circuit |
4 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
16 |
Propagation Delay |
5.5 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
5.5 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
4 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16244DLR Overview
This is a relatively small item of digital switch that is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CBT series can be used for a wide range of applications.There is a design for terminating 48 as part of its basic configuration.There is a base part number of 74CBT16244 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.Signal switch has 48 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.There are 48 pins on it.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 16 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.With a resistance of 0, it operates.With a resistance of 7Ohm, it operates.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT16244DLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16244DLR Applications
There are a lot of Texas Instruments SN74CBT16244DLR Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Speed synchronization of multiple motors in industries
- A robotic vehicle with the metal detector
- Paper plants
- Make full adder
- RF-based home automation system
- Medical industry
- Medium scale TV wall
- Telephone network
- Electronically controlled engine system