SN74CBT16245DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT16245 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 350 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16245DGVR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.The base part number is 74CBT16245, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 48 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.With 48 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 16 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches package is packaged in accordance with the TR method.A resistance of 2 governs its operation.The system operates with a resistance of 20Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT16245DGVR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16245DGVR Applications
There are a lot of Texas Instruments SN74CBT16245DGVR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor input
- Data bus control
- Memory chips
- Enabling different functions units in microprocessor instruction decoding
- Telephone network
- Solenoid cooling fan
- Electronics industry
- Used to connect a single source to multiple destinations
- Speed control of medern motors
- Analog to digital conversion
