SN74CBT16245DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 350 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.003mA |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT16245DLG4 Overview
Due to the lack of space on the board, digital switch is provided in the SSOP.The basic configuration includes 48 terminations.The multiplexer's system is powered by 4.5V voltage.In this turn signal switch, there are 48 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.It is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 16 bits.In order for 5V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 20Ohm.At 85°C, the maximum operating temperature of this signal switch is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.A minimum supply voltage of 4V is required to operate the digital swith.In addition, TTL COMPATIBLE BUS SWITCH exhibits improved characteristics.For its logic, IC BUS DRIVER is used.
SN74CBT16245DLG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
SN74CBT16245DLG4 Applications
There are a lot of Texas Instruments SN74CBT16245DLG4 Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Memory system of computers
- Telephone network
- War field flying robot with a night vision flying camera
- Automatic Monitoring systems
- Relay
- Home automation system
- Medium scale TV wall
- Recording transmission
- Control unit of Central Processing unit (CPU)
