SN74CBT16245DLR

48 Terminations4V~5.5V 48 Pin 74CBT16245 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16245DLR
Package: 48-BSSOP (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 802
Description: 48 Terminations4V~5.5V 48 Pin 74CBT16245 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-BSSOP (0.295, 7.50mm Width)
Number of Pins	48
Weight	600.301152mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74CBT16245
Pin Count	48
Operating Supply Voltage	5V
Circuit	8 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	16
Throw Configuration	SPST
Propagation Delay	7.7 ns
Quiescent Current	3μA
Turn On Delay Time	7.7 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.79mm
Length	15.88mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT16245DLR Overview

This is a relatively small item of digital switch that is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save space on the board.The package is packaged in accordance with Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBT series, which provide extensive application potential.The basic configuration includes 48 terminations.You can also find related parts by using its logic switch base part number of 74CBT16245.The multiplexer's system is powered by 5V volts.This turn signal switch has 48 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.It is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides 16 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).A power supply is provided for mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.TR is used to package the switches.As far as the resistance is concerned, it operates with 2.20Ohm is the resistance at which it operates.For higher switches' flexibility, 64mA is provided as an output current.