SN74CBT16292DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 7 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16292DGGR Overview
As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Mounting is performed using Surface Mount.the multiplexers uses an analog IC Multiplexer/Demultiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.These multiplexers are members of the 74CBT series, which provide extensive application potential.There is a design for terminating 56 as part of its basic configuration.The base part number is 74CBT16292, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.This turn signal switch consists of 56 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.Currently, it is configured with 56 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 12 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.It is provided that 5V has a power supply in order to function normally.There are 2 outputs designed for the operation of the turn signal switch.This is a signal switch that is categorized as Other Logic ICs.In the absence of external influences, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches packaging is based on TR.With a resistance of 15Ohm, it operates.If the load is supplied with 3μA voltage, stability of the multiplexers can be maintained.
SN74CBT16292DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT16292DGGR Applications
There are a lot of Texas Instruments SN74CBT16292DGGR Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Combinational circuit
- Recording transmission
- Analog to digital conversion
- LVDS
- Speed synchronization of multiple motors in industries
- Encrypted communications system
- Memory chips
- To select different task for memory in microprocessor memory systems
- Telephone network
